User Registration - Konica Minolta DRYPRO793 Installation Manual

Ch.3 Setup

3.8 User Registration

Procedures for registration/amendment/deletion of user information in DRYPRO 793 are described below.
A total of 16 user data maybe registered.
The following user registration setting may be made.
The settings detailed below are unnecessary if the log-in password has been set to
"OFF."
Item
USER ID
USER AUTHORITY
PASSWORD
PASSWORD (REINPUT)
The user name cannot be changed when making amendments to user
information.
In cases where it is necessary to change a user name, new data should be
registered after deleting data for that user.
出荷時、ユーザーは次のように登録されています。
User Name
USER 1
USER 2
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
Default
01 : User01 Sets the user name.
02 : User02 Settings may be made within a range of 1~32 alphanumerical
03~16 : (Blank) characters.
(Cannot be input when amending user information.)
01 : USER LV2 Sets privileges allocated to each user.
02 : USER LV3 "USER LV2"
03~16 : USER LV2 "USER LV3"
For details of differences in privilege at user level, refer to the
DRYPRO 793 operation manual.
01 : 01 Sets the password requested when the user logs in.
02 : 02 Settings may be made within a range of 1~15
03~16 : (Blank) alphanumerical characters.
User Level Password
2 01
3 02
< 107 >
Descriptions
: Re-output possible.
: Re-output possible, and settings may be changed.
p.179 NEW USER
(Web Mainte. Mode)