5.1
Loading Paper
5
Basic Operations
5.1
Loading Paper
5.1.1
Loading paper into the main body tray
The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper
into Tray 1.
1
Pull out the tray to load paper into.
NOTICE
Be sure to pull out the tray fully until a blue label shows on
the rear-left side of the tray. Otherwise, the feed roller may
not open or another machine trouble may occur.
2
Open the feed roller.
3
Turn two side guide lock knobs (in the front and rear sides)
counterclockwise to loosen them.
4
While pressing the side guide lock release lever (
slide it to any position (
% Slide both the front and rear side guide plates.
% Determine their locations based on the size indicator of
the bottom plate of the tray.
AccurioPress C2070series
).
),
5
5-3