Siemens SINAMICS DCM Operating Instructions Manual page 361

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Commissioning in STARTER

Slave-to-slave communication is configured in HWConfig and is simply an extension of an

existing telegram. Telegrams can be extended in STARTER (e.g. p0922 = 999).

Figure 10-14 Configuring the slave-to-slave communication links in STARTER

In order to terminate the configuration of slave-to-slave communication for the DOs, the

telegram data of the DOs in STARTER must be matched to those in the HW Config and

must be extended. The configuration is made centrally via the configuration of the respective

SINAMICS DCM DC Converter

Operating Instructions, 1.2012, C98130-A7066-A1-05-7619

Descriptions of functions

10.2 PROFIBUS