Siemens SINAMICS DCM Operating Instructions Manual page 313

Example: Changing binector and connector input parameters
For the binector input p0840[0] (OFF1) of drive object 2 binector output r0019.0 of the
Control Unit (drive object 1) is interconnected.
Figure 9-13
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
9.2 Parameterizing using the BOP20 (Basic Operator Panel 20)
Example: Changing indexed binector parameters
Operation
311