Siemens SINAMICS DCM Operating Instructions Manual page 371

Figure 10-25 STARTER - Successful assignment of the IP configuration
Once the "Edit Ethernet Node" dialog screen has closed and the node overview has been
updated (F5), a display indicates that the node properties have been successfully assigned.
Figure 10-26 STARTER - Accessible nodes update completed
Note
The IP addresses allocated for the PC and the PROFINET interface in the drive must be
different; otherwise communication between the PC and drive is not possible.
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
Descriptions of functions
10.3 PROFINET IO
369