Installation - Siemens SINAMICS DCM Operating Instructions Manual

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Installation

1. Tilt the component backwards slightly and snap it onto the mounting rail using the hook.

2. Push the component towards the mounting rail until you hear the mounting slide at the

3. You can now move the component to the left or right along the mounting rail, until it

Deinstalling

1. The lug on the mounting slide must first be pushed down to release the interlock from the

2. The component can now be tilted towards the front and removed from the mounting rail.

SINAMICS DCM DC Converter

Operating Instructions, 1.2012, C98130-A7066-A1-05-7619

rear latch into position.

reaches its final position.

mounting rail.

Removing from a mounting rail

Additional system components

7.4 Terminal Module TM31