Protective Conductor Connection And Shield Support - Siemens SINAMICS DCM Operating Instructions Manual

Additional system components
7.4 Terminal Module TM31
7.4.8

Protective conductor connection and shield support

It is always advisable to shield the digital input/output wiring.
The following diagrams show typical Weidmüller shield connection terminals for the shield
supports.
1
Figure 7-22
Weidmüller website address: http://www.weidmueller.com
If the shielding procedures described and the specified cable lengths are not observed, the
machine may not operate properly.
NOTICE
Only use screws with a permissible insertion depth of 4 - 6 mm.
218
Shield supports
DANGER
2
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter