Assignment Of Terminals And Connectors - Siemens SINAMICS DCM Operating Instructions Manual

6.9

Assignment of terminals and connectors

Connecting the unit incorrectly can lead to damage or destruction.
Power cables and busbars must be mechanically fastened in place outside of the unit.
CAUTION
The information regarding the connection capability of the terminals in the tables below is
based on values from the terminal data sheets. The connecting cables must be
dimensioned for the currents that will flow.
Overview
Table 6- 15 Terminals and connectors overview
1U1, 1V1, 1W1, 1C1, 1D1
3U1, 3W1, 3C, 3D
4U1, 4V1, 4W1, 4N1
5U1, 5W1, 5N1
XP24V
X100, X101
X126
X165, X166
X177
X178, X179
XR1
XS1
XT1
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
WARNING
Power unit
Exciter circuit
Fan
Units with Power Interface C98043-A7105/A7106:
Electronics power supply
Units with Power Interface C98043-A7107/A7108 (option L05)
Electronics power supply
DRIVE-CLiQ
PROFIBUS
Parallel interface
Analog inputs, digital inputs, digital outputs, setpoints, reference voltage (P10/N10), serial
interface (peer-to-peer), incremental encoder, analog outputs, temperature sensor
Interface to AOP30, USS interface
Relay output for line contactor (up to 240 V)
Safety shutdown E-STOP
Analog tachometer
6.9 Assignment of terminals and connectors
Connecting
151