Parameterization Menu - Siemens SINAMICS DCM Operating Instructions Manual

Operation
9.3 Controlling via the AOP30 operator panel
9.3.3

Parameterization menu

You can adjust the unit settings in the Parameterization menu.
Two display types can be selected in the AOP:
1. All parameters
2. DO selection
In both cases, the set access level governs which parameters are displayed. You can set the
access level in the menu for safety inhibits, which can be called up using the key button.
The parameters for access levels 1 and 2 are sufficient for simple applications.
At access level 3 ("Expert"), you can change the structure of the function by interconnecting
BICO parameters.
The Parameterization menu offers four options:
● Individ DO
Shows the parameters of a DO to be selected in advance
● All DO
Shows the parameters of all DOs in list format (as described above)
● Data set selection
In the "AOP" column of the "Data set selection" screen, you can choose which of the data
sets selected is currently displayed on the operator panel. The data set numbers that are set
in the drive (i.e. are currently active) are displayed in the "Drive" column. The "Max" column
shows the maximum data set number to be entered for the AOP30 display.
In parameter lists, data set parameters are indicated by the letter c, d, or e between the
parameter number and parameter designator. The number at the right of the first row from
the top shows which data set a highlighted parameter comes from.
In the commissioning wizard, the drive is commissioned using the data set selected on this
screen.
318
All the parameters present in the unit are listed with this option. The DO to which the
parameter currently selected belongs (inverted) is displayed in curly brackets in the top
left of the screen. With this display type, the response time for turning a page is
dependent on the number of DOs and is generally longer than with parameter lists that
only display one DO.
With this display type, you can pre-select a DO so that only the parameters for this DO
are listed. (The expert list in STARTER is only displayed in this DO view.)
Figure 9-19 Data set selection
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter