Displays And Using The Bop20 - Siemens SINAMICS DCM Operating Instructions Manual

Operation
9.2 Parameterizing using the BOP20 (Basic Operator Panel 20)
● p0009 Device commissioning, parameter filter
● p0011 BOP password input (p0013)
● p0012 BOP password confirmation (p0013)
● r0019 CO/BO: Control word, BOP
● p0977 Save all parameters
Drive object (DC_CTRL)
● p0010 Commissioning, parameter filter
9.2.2

Displays and using the BOP20

Features
● Operating display
● Changing the active drive object
● Displaying/changing parameters
● Displaying/acknowledging faults and alarms
● Controlling the drive using the BOP20
306
NOTICE
During a data save operation initiated by the user, the electronics power supply for the
SINAMICS DC MASTER must not be interrupted.
An active saving process is indicated by the following actions:
 The RDY LED flashes (see the "Description of functions" chapter, "Description of the
LEDs on the CUD" section)
 The BOP20 flashes
Interrupting the electronics power supply while saving can lead to the loss of the actual
unit parameter assignment. Also refer to the "Operation" chapter, "Memory Card
functions" section.
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter