Protective Conductor Connection And Shield Support - Siemens SINAMICS DCM Operating Instructions Manual

7.2.8

Protective conductor connection and shield support

Shield supports are only required if the system is connected to X521/X531.
Figure 7-8
Weidmüller: http://www.weidmueller.com
The bending radii of the cables must be observed (see MOTION-CONNECT description).
NOTICE
Only use screws with a permissible insertion depth of 4 - 6 mm.
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
Shield supports for the SMC30
Additional system components
7.2 Sensor Module Cabinet-Mounted SMC30
187