Commissioning
8.4 Commissioning with the STARTER commissioning tool
8.4.1.2
Layout of the STARTER user interface
STARTER provides these 4 operating areas:
Figure 8-5
Operating area
①
Toolbars
②
Project navigator
③
Working area
④
Detail view
8.4.2
Procedure for commissioning with STARTER
Basic procedure when using STARTER
STARTER uses a series of interactive screens to enter the data required for the drive unit.
NOTICE
The interactive screens are pre-assigned defaults that you need to adapt to your application
and configuration under certain circumstances.
This is a deliberate procedure!
Target: By taking time to consider what configuration data you enter, you can prevent
inconsistencies between the project data and drive unit data (identifiable in online mode).
238
STARTER operating areas
In this area, you can access frequently used functions by clicking icons.
The elements and objects contained in the project are displayed in this area.
Changes to the drive units are made in this area.
This area displays detailed information, for instance about faults and alarms.
Explanation
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter