7.3.6
Dimension drawing
Figure 7-14
7.3.7
Installation
Installation
1. Tilt the component backwards slightly and snap it onto the mounting rail using the hook.
2. Push the component towards the mounting rail until you hear the mounting slide at the
3. You can now move the component to the left or right along the mounting rail, until it
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
Dimension drawing of Terminal Module TM15, all data in mm and (inches)
rear latch into position.
reaches its final position.
Additional system components
7.3 Terminal Module TM15
199