Siemens SINAMICS DCM Operating Instructions Manual page 419

Bit Name
8 Reserved
9 Reserved
10 Reserved
11 Encoder fault acknowledge
active
12 Reserved
13 Transmit absolute value
cyclically
14 Parking encoder
15 Encoder fault
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
Signal status, description
1 -
0 -
1 -
0 -
-
1 Encoder fault acknowledge active
Note:
See STW.15 (acknowledge encoder fault)
0 No acknowledgement active
-
1 Acknowledgement for Gn_STW.13 (request absolute value cyclically)
Note:
Cyclic transmission of the absolute value can be interrupted by a function
with higher priority.
See Gn_XIST2

0 No acknowledgement
1 Parking encoder active (i.e. parking encoder switched off)
0 No active parking encoder
1 Fault from encoder or actual-value sensing pending.
Note:
The error code is stored in Gn_XIST2.
0 No error is pending.
Descriptions of functions
10.10 Encoder evaluation
417