Dimension Drawing; Installation - Siemens SINAMICS DCM Operating Instructions Manual

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Dimension drawing

1. Tilt the component backwards slightly and snap it onto the mounting rail using the hook.

2. Push the component towards the mounting rail until you hear the mounting slide at the

3. You can now move the component to the left or right along the mounting rail, until it

SINAMICS DCM DC Converter

Operating Instructions, 1.2012, C98130-A7066-A1-05-7619

Dimension drawing of the Sensor Module Cabinet SMC30, all data in mm and (inches)

rear latch into position.

reaches its final position.

Additional system components

7.2 Sensor Module Cabinet-Mounted SMC30