Siemens SINAMICS DCM Operating Instructions Manual page 246

Commissioning
8.4 Commissioning with the STARTER commissioning tool
Figure 8-12
⇒ Click Continue > to set up a drive unit in the project wizard.
Figure 8-13
⇒ Select the following data from the list fields:
Unit:
Type:
244
Setting up the interface
Inserting a drive unit
SINAMICS DCM
Standard CUD /
Advanced CUD, if you have purchased Option G01
Standard CUD [2] for a Standard CUD in the right-hand slot
Advanced CUD [2] for a Advanced CUD in the right-hand slot
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter