Siemens SINAMICS DCM Operating Instructions Manual page 243

Figure 8-8
⇒ Enter a project name and, if necessary, the author, memory location and a comment.
⇒ Click Continue > to set up the PG/PC interface.
Figure 8-9
⇒ Click Change and test... and set up the interface in accordance with your device
configuration.
The Properties..., Copy... and Select... buttons are available.
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
8.4 Commissioning with the STARTER commissioning tool
Creating a new project
Interface setup
Commissioning
241