Rt Classes For Profinet Io - Siemens SINAMICS DCM Operating Instructions Manual

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Connecting the PC with the STARTER commissioning tool

You can go online with STARTER in a number of ways, which are illustrated below:

Figure 10-28 Connecting the IO supervisor

SINAMICS does not support routing from PROFIBUS to PROFINET and vice versa.

If a CBE20 module fails (e.g. due to a power failure) then communication with the

subsequent nodes is interrupted at this point.

RT classes for PROFINET IO

PROFINET IO is a scalable real-time communication system based on Ethernet technology.

The scalable approach is expressed in the form of three real-time classes.

SINAMICS DCM DC Converter

Operating Instructions, 1.2012, C98130-A7066-A1-05-7619

Descriptions of functions

10.3 PROFINET IO