Operation
9.1
Basic information
9.1.1
Parameter
Parameter types
The following adjustable and display parameters are available:
● Adjustable parameters (can be written and read)
● Display parameters (can only be read)
Figure 9-1
All these drive parameters can be read via PROFIBUS and changed by means of p
parameters using the mechanisms defined in the PROFIdrive profile.
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
These parameters have a direct effect on how a function responds.
Example: Ramping time of a ramp-function generator
These parameters are used to display internal variables.
Example: Actual motor current
Parameter types
9
285