Siemens SINAMICS DCM Operating Instructions Manual page 431

Figure 10-44 Operational brake (p50080 = 2), brake-release time (p50087) negative
Footnotes for the two figures above
<1> Mechanical deceleration of drive by means of operational brake
<2> Drive coasting down; "Close holding brake" first applied when n < nmin
<4> Here, motor works against the brake, which is still closed (p50087 negative)
<5> Time for brake to be closed, during which motor continues to apply torque (p50088)
Figure 10-45 Holding brake (p50080 = 1), brake-release time (p50087) negative
SINAMICS DCM DC Converter
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
10.14 Switch-on command for holding or operational brake
Descriptions of functions
429