Solving Ethernet Controller Problems; Table 3-21 Fan Instances, Sensor Strings, And Locations - Huawei Tecal RH5485 Problem Determination And Service Manual

3 Diagnostics
Message
Security: Userid:%1 had %2
login failures from an SSH
client at IP address %3.
（%1 = User ID；
%2 = MaximumSuccessive
LoginFailures（currently set to 5
in the firmware）；
%3 = IP address,
xxx.xxx.xxx.xxx
Sensor "TPM Phy Pres Set" has
transitioned from normal to
non-critical state

Table 3-21 Fan instances, sensor strings, and locations

Instance number Sensor name
1
2
3
3
4
5
6
7
8
9
10

3.12 Solving Ethernet controller problems

The method that you use to test the Ethernet controller depends on which operating system
and which switch you are using. See the operating-system and switch documentation for
information about Ethernet controllers, and see the Ethernet controller device-driver readme
file.
Try the following procedures:


3-102
Severity Description
Error
Info
Fan 1 Tach
Fan 2 Tach
Fan 3A Tach
Fan 3B Tach
Fan 4 Tach
Fan 5 Tach
MEU Fan 1 Tach
MEU Fan 2 Tach
MEU Fan 3 Tach
MEU Fan 4 Tach
MEU Fan 5 Tach
Make sure that the correct device drivers, which come with the server, are installed and
that they are at the latest level.
Make sure that the Ethernet cable is installed correctly.
The cable must be securely attached at all connections. If the cable is attached but the
−
problem remains, try a different cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A user has exceeded the
maximum number of
unsuccessful login attempts from
SSH and has been prevented
from logging in for the lockout
period.
The physical presence for
Trusted Platform Module (TPM)
has been detected.
Location
Host server
Host server
Host server
Host server
Host server
Host server
Memory expansion enclosure
Memory expansion enclosure
Memory expansion enclosure
Memory expansion enclosure
Memory expansion enclosure
Tecal RH5485 Server
Problem Determination and Service Guide
Action
1. Make sure that the correct
login ID and password are being
used.
2. Have the system
administrator reset the login ID
or password.
No action; information only.
Issue 02 (2011-05-25)