Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
LED
Microprocessor 1 - 4 error LEDs
Microprocessor-board error LED
2.5.6 I/O-board connectors
The following illustration shows the connectors on the I/O board.
Figure 2-13 I/O-board connectors
2.5.7 I/O-board LEDs
The following illustration shows the LEDs on the I/O board.
Issue 02 (2011-05-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
When one of these LEDs is lit, it
indicates that an error has occurred in
the associated microprocessor.
Note: You must remove the top
cover bracket before you can see
these LEDs.
When this LED is lit, it indicates that
an error has occurred on the
microprocessor board.
Note: You must remove the memory
card or memory filler in memory card
connector 7 before you can see this
LED.
2 Introduction
2-17
Advertisement
Table of Contents
