Huawei Tecal RH5485 Problem Determination And Service Manual page 115

Tecal RH5485 Server
Problem Determination and Service Guide
Message
Security: Login ID:%1
had %2
login failures from CLI
at %3.
（ %1
= User ID； %2
= MaximumSuccessive
LoginFailures（currently set to 5
in the firmware）；
%3 = IP address,
xxx.xxx.xxx.xxx）
Remote access attempt
failed. Invalid userid or
password received. Userid
is%1 from WEB browser
at IP
address %2.
（%1 = User ID；%2 = IP
address，xxx.xxx.xxx.xxx）
Remote access attempt
failed. Invalid userid or
password received. Userid
is%1 from TELNET client
at IP address %2.
（%1 = User ID；%2 = IP
addresss, xxx.xxx.xxx.xxx）
The Chassis Event Log
(CEL) on system %1
cleared by user %2.
（%1 = CIM_ComputerSystem
.ElementName；%2 = User
ID）
IMM reset was initiated
by user %1.
（%1 = User ID）
Issue 02 (2011-05-25)
Severity Description
Error A user has exceeded the
maximum number of
unsuccessful login attempts from
the command-line interface and
has been prevented from logging
in for the lockout period.
Error A user has attempted to log in
from a Web browser by using an
invalid login ID or password.
Error A user has attempted to log in
from a Telnet session by using an
invalid login ID or password.
A user has cleared the IMM
Info
event log.
Info A user has initiated a reset of the
IMM.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Diagnostics
Action
1. Make sure that the correct
login ID and password are being
used.
2. Have the system
administrator reset the login ID
or password.
1. Make sure that the correct
login ID and password are being
used.
2. Have the system
administrator reset the login ID
or password.
1. Make sure that the correct
login ID and password are being
used.
2. Have the system
administrator reset the login ID
or password.
No action; information only.
No action; information only.
3-97