Huawei Tecal RH5485 Problem Determination And Service Manual page 142

5 Removing and replacing components
----End
Replacing the top-cover bracket
To replace the top-cover bracket, complete the following steps:
Step 1 Make sure that all internal cables are correctly routed.
Step 2 Align the top-cover bracket on top of the server so that the metal tabs line up correctly on the
chassis, and then rotate it into place.
Step 3 Slide the blue latches on the top cover bracket toward the outside of the server to lock it in
place.
----End
Removing the front bezel
To remove the bezel, complete the following steps:
Step 1 Read the safety information and "Installation guidelines".
Step 2 Press on the bezel retention tabs at the sides of the bezel, and pull the bezel from the server.
Step 3 If you are instructed to return the bezel, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
----End
5-12
NOTE
You do not have to remove the top cover before you remove the bezel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Issue 02 (2011-05-25)