Huawei Tecal RH5485 Problem Determination And Service Manual page 149

Hide thumbs Also See for Tecal RH5485:

Table of Contents

Tecal RH5485 Server

Problem Determination and Service Guide

Step 5 Turn on all attached devices and the server.

----End

Removing the operator information panel assembly

To remove the operator information panel assembly, complete the following steps.

Step 1 Read the safety information and "Installation guidelines" .

Step 2 Turn off the server and peripheral devices, and disconnect the power cords and all external

cables as necessary to replace the device.

Step 3 Remove the front bezel and the top cover (see "Removing the front bezel" and "Removing

the top cover").

Step 4 Remove the memory cards or fillers from slots 5, 6, 7, and 8 (see "Removing a memory

card").

Step 5 Disconnect the operator information panel cable from the microprocessor board.

Step 6 Press the blue release button above the assembly and carefully pull the assembly out of the

server. Make sure that you do not damage the cable as you remove the assembly from the

server.

Step 7 Disconnect the cable from the rear of the operator information panel.

Step 8 If you are instructed to return the operator information panel assembly, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to you.

----End

Replacing the operator information panel assembly

To install the replacement operator information panel assembly, complete the following steps:

Step 1 Connect the operator information panel cable to the rear of the new operator information

panel.

Issue 02 (2011-05-25)

Huawei Proprietary and Confidential

5 Removing and replacing components

5-19

Table of Contents