Table of Contents
Advertisement
5 Removing and replacing components
Step 4 Push in and hold the blue release button while you pull the DVD drive out of the server.
Step 5 Remove the DVD bracket from the drive.
Step 6 If you are instructed to return the DVD drive, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
----End
Replacing the DVD drive
To install the replacement DVD drive, complete the following steps:
Step 1 Install the DVD bracket on the side of the new DVD drive.
Step 2 Slide the DVD drive into the server until it engages the SATA cable.
Step 3 Install the front bezel (see "Replacing the front bezel").
Step 4 Connect the cables and power cords (see "Connecting the cables" for cabling instructions).
5-18
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Issue 02 (2011-05-25)
Advertisement
Table of Contents
