Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
----End
Removing the DVD cable
To remove the DVD cable, complete the following steps:
Step 1 Read the safety information and "Installation guidelines".
Step 2 Turn off the server and peripheral devices, and disconnect the power cords and all external
cables as necessary to replace the device.
Step 3 Remove the front bezel (see "Removing the front bezel").
Step 4 Push in the release button on the DVD drive and pull the drive out of the server.
Step 5 Remove the top cover (see "Removing the top cover").
Step 6 Remove the top cover bracket (see "Removing the top-cover bracket").
Step 7 Remove the middle fan (see "Removing the middle hot-swap fan").
Step 8 Disconnect the SAS cables and remove the ServeRAID card from the dedicated PCI
connector (see "Removing the RAID adapter carrier and the RAID adapter assembly".
Step 9 Remove the memory cards and memory card fillers (see "Removing a memory card").
Step 10 Remove the memory cage (see "Removing the memory-card cage").
Step 11 Disconnect the cable from the rear of the DVD housing.
Issue 02 (2011-05-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Removing and replacing components
5-43
Advertisement
Table of Contents
