Removing The Screw-In Raid Controller Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Figure 7-62 Installing the system battery
Step 5 Install the chassis cover. For details, see
Step 6 Install the RH2288H V3. For details, see
Step 7 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 8 Power on the RH2288H V3. For details, see
----End

7.31 Removing the Screw-in RAID Controller Card

Remove a screw-in RAID controller card before replacing it with a new one. The
appearance and position of a screw-in RAID controller card may vary according to
models, but the removal method is the same.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Issue 46 (2022-12-28)
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7 Replacing Parts
Cover.
3.5
Server.
Server.
203