Table of Contents
Advertisement
6 Configuration information and instructions
6.2.7 Obtaining the IP address for the Web interface access
The IMM MAC address tag is tied to the rear of the server. The hostname of the IMM is
"IMM-" plus the last twelve characters of the MAC address. Because the default setting of the
IMM is DHCP, after the IMM Ethernet port is connected to a management network, it can
obtain an IP address from the network and it is difficult to identify on the network. Viewing
the tag is one way to find the IMM after the server is connected to the network.
To access the Web interface, you need the IP address of the IMM which you can obtain
through the Setup utility. To obtain the IP address, complete the following steps:
Step 1 Turn on the server.
Step 2 When the prompt <F1> Setup is displayed, press F1. If you have set both a power-on
password and an administrator password, you must type the administrator password to access
the full Setup utility menu.
Step 3 Select System Settings > Integrated Management Module > Network Configuration.
Step 4 Locate the IP address.
Step 5 Exit from the Setup utility.
----End
6.2.8 Logging on to the Web interface
To log on to the IMM Web interface, complete the following steps:
Step 1 Open a Web browser and in the Address or URL field, type the IP address or host name of
the IMM to which you want to connect.
Step 2 On the Login page, type the user name and password. If you are using the IMM for the first
time, you can obtain the user name and password from your system administrator. All login
attempts are documented in the event log.
Step 3 On the Welcome page, type a timeout value (in minutes) in the field that is provided. The
IMM will log you off the Web interface if your browser is inactive for the number of minutes
that you entered for the timeout value.
Step 4 Click Continue to start the session. The System Status page, provides a quick view of the
server status.
6-12
server, and perform other management functions. Any standard Telnet client application
can access the SOL connection.
NOTE
Approximately 3 minutes after the server is connected to ac power, the power-control button becomes
active.
NOTE
If you are logging on to the IMM for the first time after installation, the IMM defaults to DHCP. If a
DHCP host is not available, the IMM assigns a static IP address of 192.168.70.125.
NOTE
The IMM is set initially with a user name of USERID and password of PASSW0RD (with a zero, not
the letter O). You have read/write access. You must change this default password the first time you log
on.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Issue 02 (2011-05-25)
Advertisement
Table of Contents
