Table of Contents
Advertisement
3 Diagnostics
Message
An
SMBIOS
Uncorrectable
CPU complex error for
Processor n has asserted. (n =
microprocessor number)
Sensor
CPU
n
OverTemp
has
to critical from a less
severe state. (n =
microprocessor number)
3-70
Severity Description
Error
Error
transitioned
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The system management handler
has detected an internal
microprocessor error.
A sensor has changed to Critical
state from a less severe state.
Tecal RH5485 Server
Problem Determination and Service Guide
Action
1.
Check for a server
firmware update.
Important:
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify that
the latest level of code is
supported for the cluster solution
before you update
the code.
2.
Make sure that the installed
microprocessors are compatible
with each other (see
"Microprocessor" for
information about
microprocessor requirements).
3.
(Trained service technician
only) Reseat microprocessor n.
4.
(Trained service technician
only) Replace microprocessor n.
(n = microprocessor number)
1.
Make sure that the fans are
operating, that there are no
obstructions to the airflow, that
the air baffles are in place and
correctly installed, and that the
server cover is installed and
completely closed.
2.
Make sure that the heat
sink for microprocessor n is
installed correctly.
3.
(Trained service technician
only) Replace microprocessor n.
(n = microprocessor number)
Issue 02 (2011-05-25)
Some cluster
Advertisement
Table of Contents
