Table of Contents
Advertisement
3 Diagnostics
Message
DHCP[%1] failure, no IP
address assigned.
（ % 1
I P 地址，即
=
xxx.xxx.xxx.xxx）
Remote Login Successful.
Login ID:
%1 from %2 at IP
address %3.
（%1 = User ID；%2 =
ValueMap (CIM_Protocol
Endpoint.ProtocolIFType；
%3 = IP address，
xxx.xxx.xxx.xxx）
Attempting to %1
server %2 by user
%3.
（%1 = Power Up, Power
Down, Power Cycle, or Reset；
%2 =
HUAWEI_ComputerSystem
.ElementName；
%3 = User ID）
Security: Userid:%1 had %2
login
failures
from
WEB
client
at
IP
address %3.
（%1 = User ID；
%2 = MaximumSuccessive
LoginFailures（currently set to 5
in the firmware）；
%3 = IP address,
xxx.xxx.xxx.xxx）
3-96
Severity Description
Info
A DHCP server has failed to
assign an IP address to the IMM.
A user has successfully logged in
Info
to the IMM.
Info
A user has used the IMM to
perform a power function on the
server.
Error
A user has exceeded the
maximum number of
unsuccessful login attempts from
a Web browser and has been
prevented from logging in for the
lockout period.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Action
1.
Make sure that the network
cable is connected.
2.
Make sure that there is a
DHCP server on the network that
can assign an IP address to the
IMM.
No action; information only.
No action; information only.
1. Make sure that the correct
login ID and password are being
used.
2. Have the system
administrator reset the login ID
or password.
Issue 02 (2011-05-25)
Advertisement
Table of Contents
