Huawei Tecal RH5485 Problem Determination And Service Manual page 206

6 Configuration information and instructions





6-6
The system-event log contains POST and system management interrupt (SMI) events
and all events that are generated by the baseboard management controller that is
embedded in the integrated management module.
Important: If the system-error LED on the front of the server is lit but there are no
other error indications, clear the system-event log. Also, after you complete a repair or
correct an error, clear the system-event log to turn off the system-error LED on the front
of the server.
− POST Event Viewer
Select this choice to access the POST event viewer to view the POST event log.
− System Event Log
Select this choice to view the system-event log.
Clear System Event Log
−
Select this choice to clear the system-event log.
User Security
Select this choice to set, change, or clear passwords. For information about passwords,
see "Passwords".
This choice is on the full and limited Setup utility menu.
− Set Power-on Password
Select this choice to set or change a power-on password. For more information, see
"Power-on password".
− Clear Power-on Password
Select this choice to clear a power-on password.
− Set Administrator Password
Select this choice to set or change an administrator password. An administrator
password is intended to be used by a system administrator; it limits access to the full
Setup utility menu. If an administrator password is set, the full Setup utility menu is
available only if you type the administrator password at the password prompt. For
more information, see "Administrator password".
− Clear Administrator Password
Select this choice to clear an administrator password.
Save Settings
Select this choice to save the changes that you have made in the settings.
Restore Settings
Select this choice to cancel the changes that you have made in the settings and restore
the previous settings.
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and restore
the factory settings.
Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the changes that
you have made in the settings, you are asked whether you want to save the changes or
exit without saving them.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Issue 02 (2011-05-25)