Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
Message
Memory Logging Limit
Reached for all DIMMs on
Subsystem System Memory.
Configuration error all
DIMMs on subsystem System
Memory.
Uncorrectable error detected
for one of the DIMMs on
Subsystem Sys- tem Memory.
Issue 02 (2011-05-25)
Severity Description
Error
The memory logging limit has
been reached.
A DIMM configuration error has
Error
occurred.
Error
A memory uncorrectable error
has occurred.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Diagnostics
Action
1.
Update the server firmware
to the latest level.
Important:
Some cluster
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify that
the latest level of code is
supported for the cluster solution
before you update
the code.
2.
Reseat the DIMMs and run
the memory test. (This test might
take up to 30 minutes to run.)
3.
Replace any DIMM that is
indicated by a lit error LED.
Make sure that DIMMs are
installed in the correct sequence
and have the same size, type,
speed, and technology.
1.
If the server failed the
POST memory test, reseat the
DIMMs.
2.
Replace any DIMM that is
indicated by a lit error LED.
Note: You do not have to replace
DIMMs by pairs.
3.
Run the Setup utility to
enable all the DIMMs.
4.
Run the memory test. (This
test might take up to 30 minutes
to run.)
3-83
Advertisement
Table of Contents
