Table of Contents
Advertisement
5 Removing and replacing components
Step 1 Read the safety information and "Installation guidelines".
Step 2 Turn off the server and peripheral devices, and disconnect the power cords and all external
cables as necessary to remove the adapter.
Step 3 Remove the top cover (see "Removing the top cover").
Step 4 Disconnect any cables from the adapter.
Step 5 Lift the blue adapter retention latch up away from the server and open the tab.
Step 6 Carefully grasp the adapter by its top edge or upper corners, and pull the adapter from the
server.
Step 7 If you are instructed to return the adapter, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
----End
Replacing an adapter
To install a replacement PCI Express adapter, complete the following steps:
Step 1 See the documentation that comes with the adapter for instructions for setting jumpers or
switches and for cabling.
5-14
NOTE
If you are replacing a ServeRAID adapter that has a battery, you must install the adapter in a full-length
slot. You must also leave an empty expansion slot on each side of the adapter.
NOTE
Route adapter cables before you install the adapter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
Issue 02 (2011-05-25)
Advertisement
Table of Contents
