Using The Integrated Management Module - Huawei Tecal RH5485 Problem Determination And Service Manual

6 Configuration information and instructions

Setup and configuration overview
When you use the ServerGuide Setup and Installation CD, you do not need setup diskettes.
You can use the CD to configure any supported HUAWEI server model. The setup program
provides a list of tasks that are required to set up your server model. On a server with a
ServeRAID adapter or integrated SCSI controller with RAID capabilities, you can run the
SCSI RAID configuration program to create logical drives.
Typical operating-system installation
The ServerGuide program can reduce the time it takes to install an operating system. It
provides the device drivers that are required for your hardware and for the operating system
that you are installing. This section describes a typical ServerGuide operating-system
installation.
Step 1 After you have completed the setup process, the operating-system installation program starts.
(You will need your operating-system CD to complete the installation.)
Step 2 The ServerGuide program stores information about the server model, service processor, hard
disk drive controllers, and network adapters. Then, the program checks the CD for newer
device drivers. This information is stored and then passed to the operating-system installation
program.
Step 3 The ServerGuide program presents operating-system partition options that are based on your
operating-system selection and the installed hard disk drives.
Step 4 The ServerGuide program prompts you to insert your operating-system CD and restart the
server. At this point, the installation program for the operating system takes control to
complete the installation.
----End
Installing your operating system without using ServerGuide
If you have already configured the server hardware and you are not using the ServerGuide
program to install your operating system, complete the following steps to download the latest
operating-system installation instructions from the HUAWEI Web site.

6.2.6 Using the integrated management module

The integrated management module (IMM) is a second generation of the functions that were
formerly provided by the baseboard management controller hardware. It combines service
processor functions, video controller, and remote presence function in a single chip.
The IMM supports the following basic systems-management features:

6-10
Includes an online readme file with links to tips for hardware and operating-system
installation
NOTE
Features and functions can vary slightly with different versions of the ServerGuide program.
NOTE
Features and functions can vary slightly with different versions of the
Active Energy Manager.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Tecal RH5485 Server
Problem Determination and Service Guide
ServerGuide program.
Issue 02 (2011-05-25)