Huawei Tecal RH5485 Problem Determination And Service Manual page 119

Tecal RH5485 Server
Problem Determination and Service Guide
Message
Flash of %1 from %2
failed for user
%3.
（%1 =
CIM_ManagedElement.
ElementName ； %2
Web or
LegacyCLI；%3 = User ID）
The Chassis Event Log
(CEL) on system %1 is
75% full.
（%1 =
CIM_ComputerSystem.
ElementName）
The Chassis Event Log
(CEL) on system %1 is
100% full.
（%1 =
CIM_ComputerSystem.
ElementName）
%1 Platform Watchdog
Timer expired for %2.
（%1 = OS Watchdog or
Loader Watchdog;
%2 = OS Watchdog or Loader
Watchdog;）
IMM Test Alert Generated
by %1.
（%1 = User ID）
Issue 02 (2011-05-25)
Severity Description
Info An attempt to update a firmware
component from the interface and
IP address has failed.
=
Info The IMM event log is 75% full.
When the log is full, older log
entries are replaced by newer
ones.
Info The IMM event log is full. When
the log is full, older log entries
are replaced by newer ones.
Error A Platform Watchdog Timer
Expired event has occurred.
Info A user has generated a test alert
from the IMM.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Diagnostics
Action
Try to update the firmware again
To avoid losing older log entries,
save the log as a text file and
clear the log.
To avoid losing older log entries,
save the log as a text file and
clear the log.
1. Reconfigure the watchdog
timer to a higher value.
2. Make sure that the IMM
Ethernet over USB interface is
enabled.
3. Reinstall the RNDIS or
cdc_ether device driver for the
operating system.
4. Disable the watchdog.
5. Check the integrity of the
installed operating system.
No action; information only.
3-101