Table of Contents
Advertisement
3 Diagnostics
Message
Memory logging limit
reached for DIMM Err Card
n on subsystem Sys- tem
Memory.
Configuration error for
memory device
n on subsystem System
Memory.
（n = DIMM number）
Configuration error for
DIMM Err Card
subsystem
System
Memory.
Memory device n on
subsystem Sys- tem Memory
throttled. （n = DIMM
number）
DIMM Err Card n on
subsystem Sys- tem Memory
throttled.
3-86
Severity Description
Error
Error
Error
n
on
Error
Info
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The memory logging limit has
been reached.
A DIMM configuration error has
occurred.
A memory card configuration
error has occurred.
A sensor has changed to critical
state from a less severe state.
A sensor has changed to critical
state from a less severe state.
Tecal RH5485 Server
Problem Determination and Service Guide
Action
1.
Update the server firmware
to the latest level.
Important:
solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify that
the latest level of code is
supported for the cluster solution
before you update
the code.
2.
Reseat the memory cards
and run the memory test. (This
test might take up to 30 minutes
to run.)
3.
Replace any memory card
that is indicated by a lit error
LED.
Make sure that DIMMs are
installed in the correct sequence
and have the same size, type,
speed, and technology.
Make sure that DIMMs are
installed in the correct sequence
and have the same size, type,
speed, and technology.
1.
Make sure that the fans are
operating, that there are no
obstructions to the airflow, that
the air baffles are in place and
correctly installed, and that the
server cover is installed and
completely closed.
2.
If a fan has failed, complete
the action for a fan failure.
3.
Replace DIMM n. (n =
DIMM number)
No action; information only.
Issue 02 (2011-05-25)
Some cluster
Advertisement
Table of Contents
