Huawei Tecal RH5485 Problem Determination And Service Manual page 205

Tecal RH5485 Server
Problem Determination and Service Guide




Issue 02 (2011-05-25)
address; specify whether to use the static IP address or have DHCP assign the IMM
IP address; save the network changes; and reset the IMM.
- Reset IMM to Defaults
Select this choice to view or reset the IMM to the default settings.
- Reset IMM
Select this choice to reset the IMM settings.
− Legacy Support
Select this choice to view or set legacy support.
- Force Legacy Video on Boot
Select this choice to force INT video support, if the operating system does not
support UEFI video output standards.
- Rehook INT
Select this choice to enable or disable devices from taking control of the boot process.
The default is Disable.
- Legacy Thunk Support
Select this choice to enable or disable UEFI to interact with PCI mass storage
devices that are not UEFI compliant.
- Network
Select this choice to view or configure optional network devices, such as iSCSI, PXE,
and network devices. There might be additional configuration choices for optional
network devices that are compliant with UEFI 2.1 and later.
Date and Time
Select this choice to set the date and time in the server, in 24-hour format
(hour:minute:second).
This choice is on the full Setup utility menu only.
Start Options
Select this choice to view or change the start options, including the startup sequence,
keyboard NumLock state, PXE boot option, and PCI device boot priority. Changes in the
startup options take effect when you restart the server.
The startup sequence specifies the order in which the server checks devices to find a
boot record. The server starts from the first boot record that it finds. If the server has
Wake on LAN hardware and software and the operating system supports Wake on LAN
functions, you can specify a startup sequence for the Wake on LAN functions. For
example, you can define a startup sequence that checks for a disc in the CD-RW/DVD
drive, then checks the hard disk drive, and then checks a network adapter.
This choice is on the full Setup utility menu only.
Boot Manager
Select this choice to view, add, or change the device boot priority, boot from a file,
select a one-time boot, or reset the boot order to the default setting.
System Event Logs
Select this choice to access the System Event Manager, where you can view the
event log and the system-event log.
The POST event log contains the three most recent error codes and messages that were
generated during POST.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Configuration information and instructions
POST
6-5