Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
Step 11 Install the I/O-board shuttle (see "Replacing the I/O-board shuttle"). Be sure to thread the
USB and DVD/CD signal cables through the server and connect them to the I/O-board
shuttle.
Step 12 Install the top cover bracket (see "Replacing the top-cover bracket").
Step 13 Install the power supplies (see "Replacing the hot-swap power supply").
Step 14 Install the top cover (see "Replacing the top cover").
Step 15 Connect the cables and power cords (see "Connecting the cables" for cabling instructions).
Step 16 Turn on all attached devices and the server.
Step 17 Using the utility program, restore the system configuration, such as the IMM IP addresses,
vital product data, and the machine type, model number, and serial number of the server.
Step 18 Using the utility program, restore the system configuration to the new microprocessor board.
----End
Removing the memory-card cage
To remove the memory-card cage, complete the following steps.
Step 1 Read the safety information and "Installation guidelines".
Issue 02 (2011-05-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Removing and replacing components
5-69
Advertisement
Table of Contents
