Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
Step 6 If necessary, remove all DIMMs.
Step 7 If you are instructed to return the memory card, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
----End
Replacing the memory card: To install the replacement memory card, complete the following
steps:
Step 8 Insert the memory card into the memory-card connector. Press the memory card into the
connector and the retention latch down onto the top of the memory card.
Step 9 Slide the blue release latch toward the front of the server, into the locked position.
Step 10 Install the top cover (see "Replacing the top cover").
----End
Removing a DIMM: DIMMs must be installed in pairs of the same type and speed. To use
the memory-mirroring feature, all the DIMMs that are installed in the server must be of the
same type and speed, and the operating system must support memory mirroring.
To remove a DIMM, complete the following steps.
Step 11 Read the safety information and "Installation guidelines".
Step 12 Turn off the server and peripheral devices, and disconnect the power cords and all external
cables as necessary.
Step 13 Remove the top cover (see "Removing the top cover").
Step 14 Remove the memory card (see "Removing a memory card").
Issue 02 (2011-05-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Removing and replacing components
5-35
Advertisement
Table of Contents
