Table of Contents
Advertisement
Tecal RH5485 Server
Problem Determination and Service Guide
Do not touch the thermal grease on the bottom of the heat sink or set down the heat sink after
you remove the plastic cover. Touching the thermal grease will contaminate it.
1.
2.
3.
4.
5.
Step 19 Replace the top cover bracket (see "Replacing the top-cover bracket").
Step 20 Install the top cover (see "Replacing the top cover").
Step 21 Slide the server into the rack.
Step 22 Reconnect the external cables; then, reconnect the power cords and turn on the peripheral
devices and the server.
Issue 02 (2011-05-25)
CAUTION
Make sure that the heat-sink release lever
Remove the plastic protective cover from the bottom of the heat sink.
Position the heat sink above the microprocessor with the thermal grease side down and
align the clips of the heat sink with the tabs next to the microprocessor socket.
Press down firmly on the heat sink
Rotate the heat-sink release lever
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Removing and replacing components
is in the fully open position.
until it is seated securely.
to the closed and locked position.
5-65
Advertisement
Table of Contents
