Figure 2-15 I/O-Board Jumpers; Table 2-5 I/O-Board Jumper Blocks - Huawei Tecal RH5485 Problem Determination And Service Manual

Tecal RH5485 Server
Problem Determination and Service Guide

Figure 2-15 I/O-board jumpers

Table 2-5 I/O-board jumper blocks

Jumper name
Wake on LAN bypass (J31)
Password override (J29)
Issue 02 (2011-05-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The default position is pins 1 and 2.
Move the jumper to pins 2 and
3 to prevent a Wake on LAN packet
from waking the system when the
system is in the powered-off state.
The default position is pins 1 and 2.
Change the position of this jumper to
pins 2 and 3 to bypass the power-on
password check.
Changing the position of this jumper
does not affect the administrator
password check if an administrator
password is set. If you forget the
administrator password, you must
replace the microprocessor board.
For more information
passwords, see "Passwords".
2 Introduction
about
2-19