Table of Contents
Advertisement
5 Removing and replacing components
Step 6 Lift the heat sink
slightly twist the heat sink back and forth to break the seal. After removal, place the heat sink
on its side on a clean, flat surface.
Step 7 Open the microprocessor release latch
side, and releasing it in the open (up) position. Swing open the microprocessor load plate
Step 8 Find the microprocessor installation tool that comes with the new microprocessor.
5-60
out of the server. If the heat sink sticks to the microprocessor,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Problem Determination and Service Guide
by pressing down on the end, moving it to the
Tecal RH5485 Server
Issue 02 (2011-05-25)
.
Advertisement
Table of Contents
