Configuring Voice Gateway Channels Using Element Manager - Nortel 1000 Installation And Commissioning Manual

Configuring voice gateway channels using
Element Manager
Installing and configuring a Voice Gateway Media Card
Description, Installation, and Operation (NN43100-500) for a detailed
configuration procedure.
The voice gateway channels are also called "DSP channels" or the card's
"physical TNs". Follow Procedure 68 to configure the voice gateway
channels using Element Manager.
Note: The voice gateway channels can also be configured using LD 14.
To configure the voice gateway channels using LD 14, follow
Procedure 69 on
Procedure 68
Adding voice gateway channels using Element Manager
1 Select IP Network > Nodes: Servers, Media Cards from the navigator.
The Node Configuration web page opens, as shown in Figure 127 on
page 320.
2 Click the + next to the desired node to expand it.
3 Click VGW Channels next to the desired card.
If no VGW channels are configured yet, an alert box is displays. Click OK
to close the alert box.
The VGW channels configuration for this card opens, as shown in
Figure 130.
Figure 130
VGW Channel web page
4 Click Add.
Communication Server 1000E
page 326.
Page 323 of 466
Installation and Commissioning