Nortel 1000 Installation And Commissioning Manual page 416

Page 416 of 466
Figure 174
Node Password
NN43041-310 Standard 01.11
Installing and configuring Nortel IP Phones
9 Enter the administrator Nortel IP Phone Installer Password in the Node
Password box (see Figure 174).
Note: The entered password appears as asterisks. The valid characters
are 0-9 * #. The password can be null or 6 to 14 digits in length.
WARNING
If the administrator password is null (zero length), then
the Node ID, TN, and Password screens are not
displayed on the IP Phones during their registration
process. This provides security as it prevents any entry
of passwords or TNs on the IP Phones. However, it is
impossible to install new IP Phones (unless a temporary
password is set).
10 Select NodePwd from the Group drop-down list.
11 Select nodePwdShow from the Command drop-down list.
12 Click RUN.
The updated administrator Nortel IP Phone Installer Password is
displayed in the text area at the bottom of the web page.
13 Enter the temporary Nortel IP Phone Installer Password (see
Figure 175):
a. Enter the password in the Node Password text box.
b. Select NodePwd from the Group drop-down list.
c. Select nodeTempPwdSet from the Command drop-down list.
The area then displays the Uses and Timeout text boxes.
d. Enter a value for the number of uses or a value for timeout (in hours)
or both.
14 Click SET.
October 2008