Configuring A Card As A Node Leader - Nortel 1000 Installation And Commissioning Manual

Page 322 of 466

Configuring a card as a node Leader

NN43041-310 Standard 01.11
Installing and configuring a Voice Gateway Media Card
Figure 129
Cards
6 Save the node.
a. Click Save and Transfer at the bottom of the Edit web page
b. Click OK to save this node.
A Voice Gateway Media Card remains at the default "Follower" setting in a
CS 1000E system. A Signaling Server is the IP telephony node Leader.
In an IP telephony node without a Signaling Server, one of the Voice
Gateway Media Cards must be configured as a Leader. If this is your
configuration, see the IP Line: Description, Installation, and Operation
(NN43100-500) for a detailed configuration procedure.
Normally, Voice Gateway Media Cards default as Followers. If you need to
configure a Voice Gateway Media Card as a Follower, see the IP Line:
October 2008
End of Procedure