Nortel 1000 Installation And Commissioning Manual page 424

Table of Contents

Advertisement

Page 424 of 466
NN43041-310
Standard 01.11
Installing and configuring Nortel IP Phones
b.
Enter 1 to configure manual VLAN.
The Nortel IP Phone prompts:
VLAN: x
Go to step 14 on
c.
Press the OK key.
The Nortel IP Phone prompts:
Invalid TN: x.x
Reason: Unequipped.
Go offhook to do SBI
14 Enter the VLAN ID.
The Nortel IP Phone displays:
Locating server...
If you did not configure an Nortel IP Phone Installer Password, after
several seconds, the Nortel IP Phone prompts:
Node: x
TN: x.x
15 Enter the node number and the Nortel IP Phone's (virtual) TN, then go to
Step 18.
If you configured an Nortel IP Phone Installer Password, the Nortel IP
Phone prompts:
Node: x
PassWord: x
16 Enter the node number and the temporary or administrator Nortel IP
Phone Installer Password.
Note 1: An asterisk is displayed for each password digit entered; the
actual password is not displayed.
Note 2: If this screen times out, or if you do not successfully enter the
password in three attempts, the Nortel IP Phone continues its registration
process as if no entry had been made to this prompt. You can reboot the
telephone and try again if more tries are needed.
The Nortel IP Phone prompts:
TN: x.x
October 2008
page
424.

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000eCommunication server 1000Communication server 1000e

Table of Contents