Nortel 1000 Installation And Commissioning Manual page 411

Table 55
LD 11 – Configure a Nortel IP Phone (Part 3 of 4)
Prompt
Installing and configuring Nortel IP Phones
Response Description
Key number limits that can be assigned are as follows:
Note: The first Nortel IP Phone KEM is assigned keys 32-55,
and the second Nortel IP Phone KEM is assigned keys 56-79.
Type xx = NUL to remove a key function or feature for
i2002 and i2004.
If either the Meridian Programmable Data Adapter
(MPDA) or the Display Module is equipped, then key 7
on sets M2008, M2216, and M2616 sets and key 5 on
set M2006 will become Program keys which cannot be
used as function keys.
Any printout of the TN block will not show key 7 because
it is a local function key.
On the M2616, if CLS = HFA, key 15 on the voice TN
defaults to the Handsfree key. No other feature
assignment is accepted.
Primary and secondary data DNs must be unique.
A station SCR, SCN, MCR, or MCN DN must be
removed as a member from all Group Hunt lists before
the DN can be modified.
Communication Server 1000E
0-7 for Meridian Communications Adapter (MCA)
0-5 for M2006
0-7 for M2008
0-59 for M2616, varies with number of add-on
modules
0-79 for I2002, varies with value of KEM
0-79 for I2004, varies with value of KEM
Page 411 of 466
Installation and Commissioning