Nortel 1000 Installation And Commissioning Manual page 230

Page 230 of 466
Figure 107
Installation Tool quit confirmation
Adding a follower Signaling Server
NN43041-310 Standard 01.11
Installing a Signaling Server
14 Enter q to close/terminate the Installation Tool and reboot the Signaling
Server.
After configuration and reboot, a Follower Signaling Server sends out
BOOTP requests and waits for a response. Since the Follower Signaling
Server is not yet configured in an IP Telephony node, there is no BOOTP
response. Do not wait for this response. Complete Procedure 45, "Adding a
Follower Signaling Server to an IP Telephony node," on
October 2008
End of Procedure
page 231.