Nortel 1000 Installation And Commissioning Manual page 162

Page 162 of 466
LD 117 – Bandwidth management zone commands
Command
NEW ZONE xxx p1 p2 p3 p4 p5
NEW ZONE xxx
CHG ZONE xxx p1 p2 p3 p4 p5
OUT ZONE xxx
DIS ZONE xxx
ENL ZONE xxx
PRT ZONE xxx
NN43041-310 Standard 01.11
Configuring the CS 1000E CP PM Call Server
Description
Create a new zone, where:
xxx = zone number = (0) - 255.
p1 = Intrazone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p2 = Intrazone preferred strategy
= (BQ for Best Quality) or BB for Best Bandwidth
p3 = Interzone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
Create a new zone with default values for the parameters:
p1 = 10 000 (Kbps)
p2 = BQ
p3 = 10 000 (Kbps)
p4 = BQ
p5 = shared
Change parameters of a zone. All parameters, including
those that are unchanged, must be re-entered.
Remove a zone.
Disable a zone. When a zone is disabled, no new calls
are established inside, from, or toward this zone.
Enable a zone.
Print zone and bandwidth information.
October 2008
End of Procedure